Daguerreotype by an unidentified photographer 3-1/4" x 4-1/4" circa 1845
in the nineteenth century employed a wide variety of
materials and processes; everything from honey to uranium
found its way into one method or another. In some cases
there is no way to tell, short of exacting scientific
analysis, just what sort of variation was used to obtain a
specific result. Most early photographs, however, fall into
recognizable categories for which brief descriptions follow
in alphabetical order.
PRIMER ON PROCESSES
Photographers in the nineteenth century employed a wide variety of materials and processes; everything from honey to uranium found its way into one method or another. In some cases there is no way to tell, short of exacting scientific analysis, just what sort of variation was used to obtain a specific result. Most early photographs, however, fall into recognizable categories for which brief descriptions follow in alphabetical order.
Albumen prints outnumber any other type of photographic positive made during the nineteenth century. They have a sepia color and slightly glossy surface. Thin sheets of paper were first coated with egg white and salt, then floated on silver nitrate to make them sensitive to light. The image is created by printing under a negative in sunlight. The finished picture is fixed, washed, and often gold toned before mounting. Invented by Louis Desire Blanquart-Evrard of France in 1850.
The ambrotype process was patented in 1854 and enjoyed great popularity for a few short years, and again during the Civil War. It produced pictures on glass instead of metal plates. Like the earlier daguerreotype, each image is unique, made one-at-a-time in the camera. The glass is flowed with a sticky material known as iodized collodion. It is then sensitized by being dipped into a bath of silver nitrate, and exposed in the camera while still wet. A chemical developer is used to bring out the image. The glass plate is then backed with black material--paint, cloth or paper--and furnished in a case similar to those used for daguerreotypes. The ambrotype process was marketed as an improvement, because the finished image lacked the glittery, elusive reflective quality of daguerreotypes and was therefore easier to view. The detail and tonal range, however, tend to be less impressive than in the earlier process.
Autochrome plates were the invention of Auguste and Louis Lumiere, who patented the process in 1904 and began to market it commercially in 1907. Microscopic grains of potato starch were dyed red, green, and blue-violet, then mixed evenly and coated onto a sheet of glass. A black-and-white emulsion was then flowed over this layer. During exposure, the grains of potato starch on each plate acted as millions of tiny filters. The light-sensitive emulsion was then reversal processed into a positive transparency. When viewed, light passes through the emulsion and is filtered to the proper color by the starch grains. The resulting mosaic of glowing dots on glass gives autochromes the look of pointillist paintings.
Calotype was the name given to the first practical negative-positive process of photography. Capable of producing multiple copies of any given image, the calotype (also called Talbotype) was invented by William Henry Fox Talbot in September of 1840. An earlier Talbot invention, photogenic drawing, was also capable of creating photographic images in the camera, but was quite slow and could not be used for photographing people or anything that moved. To make a calotype, plain sheets of writing paper are coated with a solution of silver nitrate, dried, then dipped in potassium iodide to form silver iodide. After being dried again, the paper is floated on a mixture containing silver nitrate and gallic acid. The same mixture is used to develop the negative image after exposure. Following fixing in hypo, this paper negative was generally waxed for transparency and used to make salt prints.
Carbon prints, patented in 1864 by Joseph Wilson Swan, offered a permanent image without grain. The process was capable of making exquisite prints with a wide tonal range. Negatives were printed onto a "tissue" containing carbon and other pigments in a gelatin base. The gelatin had previously been made light-sensitive by a bath of potassium bichromate. After washing, the image on the tissue was transferred to a paper base and the backing of the tissue was stripped off.
Collodion negatives--see Wet Plate
Collodion prints used the same sticky nitrocelluluse emulsion, collodion, as ambrotypes. This was mixed with silver chloride and coated onto paper. The surface could be matte, glossy, or semi-gloss like an albumen print. The whites of the image generally lack the yellowish cast of albumen prints. Collodion prints are difficult to distinguish from other silver prints made circa 1890-1910, and usually require testing by a trained conservator to identify with certainty.
The cyanotype process was invented in 1842 by Sir John Herschel but was most popular around the turn of the century. The brilliant blue images have a matte surface. Because iron salts are used (rather than silver compounds) for the light-sensitive material, cyanotypes are highly stable. Architectural blueprints were made by the same process.
The daguerreotype process, the first practical form of photography, was made public in August of 1839, but seldom able in its earliest form to produce portraits. This was due to the lengthy exposure time required. A daguerreotype is made on a sheet of silver-plated copper. The silver surface is polished to a mirror-like brilliance. The plate is then sensitized over iodine vapor, exposed in the camera, and developed with mercury vapor. By 1840, experimenters had succeeded at increasing the sensitivity of the process by using chlorine or bromine fumes in addition to the iodine vapor. The earliest daguerreotypes tend to have bluish or slate grey tones; a brown-toning process called "gilding" came into widespread (but not universal) use late in 1840. Daguerreotypes have exceptionally fragile surfaces and for this reason, they were always furnished behind glass in frames or small folding cases. Click for more about daguerreotypes.
Dilute albumen print--an early variation (first proposed by the inventor of albumen paper in 1850) in which the albumen is diluted with salt water in order to reduce the gloss. The resulting image can have a matte finish like a calotype, with the finer detail and tonality of an albumen print.
Gelatin-silver see silver print
Lightly-albumenized print--see Dilute albumen print
Melainotype--original name for the tintype process.
Photogenic drawing was the name William Henry Fox Talbot gave to his initial photographic invention. As early as 1834, Talbot was making salt prints by placing lace, leaves and other objects on light-sensitive paper and exposing it to the sun. Although Talbot used photogenic drawing paper in the camera--creating negatives by 1835--exposures in the camera often took hours, so most photogenic drawings were made by the superposition of objects.
Photogravure is a photomechanical process; that is, one in which the finished prints are made in ink on a printing press. The method, one of the finest ever developed, transferred the photographic image to a copper printing plate, which was then etched to retain ink in areas corresponding to the blacks of the picture. Photogravure was invented by Karl Klic in Austria in 1879.
Platinum prints are among the most beautiful and permanent of all photographs. They provide a wide range of subtle grey tones, and the image is embedded in the fibers of the paper--instead of in an emulsion coating the paper surface. Thus, like salt prints and cyanotypes, the surfaces of platinum prints have no natural sheen or gloss. Because the finished image is made of metallic platinum which is highly stable, these photographs are resistant to fading. Their tones are generally silvery to black, but warmer brown tones were also achieved.
Salt print refers to the positive printing procedure invented by Talbot. The negative is placed in contact with a sheet of writing paper which has been floated on salt water and then coated with silver nitrate. After exposure to sunlight, the finished print is fixed in "hypo', washed and dried. Unless they have been glazed or varnished, salt prints have a matte surface, with the image actually embedded in the fibers of the paper. Their tones can range from reddish brown to chestnut brown.
Silver print is a term used here and elsewhere for a variety of processes, many of which cannot be precisely identified without laboratory testing. The light-sensitive compounds can be silver chloride or silver bromide or a mixture of these. They can be coated onto the paper in a layer of gelatin or collodion; their surfaces can be matte, glossy, or somewhere in between; and their tones can mimic the silvery greys of platinum prints, the warm browns of albumen prints, or a range of other colors. Most of the billions of black-and-white photographs made during the 20th century have been gelatin-silver prints.
Talbotype see Calotype
Tintypes were the invention of Prof. Hamilton Smith of Ohio. They begin as thin sheets of iron, covered with a layer of black paint. This serves as the base for the same iodized collodion coating and silver nitrate bath used in the ambrotype process. First made in 1856, millions were produced well into the twentieth century. When tintypes were finished in the same sorts of mats and cases used for ambrotypes, it can be almost impossible to distinguish which process was used without removing the image to examine the substrate.
Wet Plate--the name given to a process invented by Frederick Scott Archer of England in 1851. Widely used to produce negatives but also employed in a modified form to produce positives (see ambrotypes and tintypes). As a negative process, a piece of clear glass is coated with a very thin layer of iodized collodion (made from gun-cotton [nitrocellulose] dissolved in ether and alcohol, mixed with potassium iodide). The coated plate is dipped in a silver solution in the darkroom which makes it light-sensitive. After this, the plate must be immediately exposed in a camera. The exposure needs to be completed before the chemicals on the plate have time to dry out--hence the name of the process. After development and fixing, the negative can be printed on any material. Most wet plate negatives, however, were used to make prints on albumen paper.
Woodburytype--a photomechanical process in which the completed prints are not made with light-sensitive materials. One of the most beautiful and permanent of all methods of producing prints in quantity, the Woodburytype process was also among the most difficult. A light-sensitive gelatin material is exposed to a negative, resulting in a three-dimensional relief-map of the image. Then the difficult part: applying huge pressure (with a hydraulic press) on the gelatin relief to make an impression in a block of lead. The lead mold is used to make the prints, which have exquisite tonality and a slightly raised surface. Introduced 1865. For additional information on the Woodburytype process, including photographs of what may be the only surviving Woodburytype hydraulic press, visit http://www.geocities.com/woodburytype
THE WEB Unidentified
Photographer: Spider. Tintype, circa
Unidentified Photographer: Spider. Tintype, circa 1870
Looking for Photography Books? Click Here!